Showing posts with label mono. Show all posts
Showing posts with label mono. Show all posts
Tuesday, September 2, 2014
Mono audio amplifier 1 5W
- VCC MIN. V - 6
- VCC NOM. V - 12
- VCC MAX. V - 18
- P. OUT W - 1.5
- RL OHM - 15
Tuesday, August 26, 2014
Tone control mono circuit with C828 C945
This is mono circuit tone control , include adjusting bass , trebel , and master volume. Minimum voltage require 15 volt and maximum voltage 45 volts.See schematic and construction below :
Friday, August 22, 2014
25W MONO AMPLIFIER WITH MUTE ST BY
Features:
- WIDE SUPPLY VOLTAGE RANGE (UP TO
- 50V ABS MAX.)
- SPLIT SUPPLY
- HIGH OUTPUT POWER:
- 25W @ THD =10%, RL = 8Ω, VS = +20V
- NO POP AT TURN-ON/OFF
- MUTE (POP FREE)
- STAND-BY FEATURE (LOW IQ)
- FEW EXTERNAL COMPONENTS
- SHORT CIRCUIT PROTECTION
- THERMAL OVERLOAD PROTECTION
DESCRIPTION:
The TDA7261 is class AB Audio power amplifier assembled in the Multiwatt package, specially de- signed for high quality sound application in mono TV chassis.
Circuit Diagram:
 |
| 25W MONO AMPLIFIER WITH MUTE/ST-BY |
Wednesday, August 20, 2014
Schematic Power Amplifier with IC AN7116 Mono Amplifier
*notif : this is mono amplifier.
On this schematic circuit power amplifier with IC AN7116 , this schematic only use the IC because itsnot have similiar IC. To operate the Circuit , you must have any components too , such as resistor , condensator , etc. In order to be a circuit that works on good power amplifier.
This Circuit requires minimum voltage 3 volt and maximum voltage 9 volt . Ouput power of this circuit is 1 watt, and impedance is 4 Ohm.
To see Schematic Circuit ,please see below on figure 1.0 :
 | |||
| Figure 1.0 |
 |
| This package of IC : SIL-9 |
Subscribe to:
Posts (Atom)
